After 24 hours of working on the scene, our project manager, Zhang Mingcai, fell asleep on the floor and used a short rest to relieve his fatigue. Let's look back at what he had gone through for the next 24 hours.

Time traced to half past five in the early morning of June 14, 2018, he started from Hangzhou, flying 3 hours, then 1.5 hours to take a bus, sit the 0.5 hours, to Guangxi Hezhou aluminum electronics industry park.

The RUNPAQ fuel auxiliary boiler ignition task will be completed on the same day. At half past ten, he joined the commissioning engineer, Sheng Xin, to begin the last inspection before the ignition of the boiler.

(commissioning engineer Sheng Xin holds the manual device to calibrate the field).

At 14:28 PM, the ignition of the RUNPAQ auxiliary fuel boiler was successful.

(outdoor layout of the blue top boiler room in the mountains surrounded by particularly dazzling).

Taking into account the overall progress of the project in advance, project manager Zhang Mingcai and commissioning engineer Sheng Xin kept on working overtime at night. This night, they observe the rise and rise of the furnace in the control room and the field, record the operating data, adjust the boiler operating load, and guide the owner's technical personnel to operate.

The above work is ready and the hour hand is fixed at nine a.m. on June 15th. Back to the beginning, Zhang Mingcai, a sleepy project manager, explained the seriousness and attitude of RUNPAQ with action, aiming to win every owner's "trustworthy" moment.